Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’re towing, you need to know that your supplemental braking system is actually pressing the brake pedal—not just trying to. This kit wires directly to the brake pedal so your RV’s monitor only lights up when the pedal is physically depressed. That means you’ll see a true signal of when your towed vehicle’s brakes are applied, not just when the system activates. It helps prevent issues like a pedal being held down too long, which can cause tire or brake wear.
The kit connects to the fuse box to pull constant current from a 12-volt source, giving dependable operation every mile. There’s no guessing about intermittent signals or voltage drops; the steady power feed keeps your brake signal accurate through every stop.
If your vehicle doesn’t have a tow mode in the ignition, this switch kit solves that problem by keeping your supplemental braking system and monitor working correctly even when the key is off. It’s one less thing to worry about when setting up for travel days.
Owners report thousands of towing miles with no issues. The parts are built to withstand constant use and vibration, so once you’ve got it installed, it just works trip after trip. It’s a small addition that makes a big difference in making sure your braking system is doing exactly what it should.
Flat towing can be a much more convenient way to take your car RVing with you than using a trailer or a tow dolly. It'll save you storage space both at home and at the campsite, and it takes less time and hassle to hook up.
To flat tow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flat tow braking system.
| For the RV | Between the RV and Towed Car | For the Towed Car |
|---|---|---|
| Hitch | Tow bar | Base plate |
| Wiring plug | Safety cables | Braking system |
| Wiring adapter cord | Wiring kit/diodes |
The custom-fit base plate installs on the frame of your toad so you can connect the car to your RV with a tow bar. Hook up safety cables between the vehicles to ensure that the toad does not separate from the motorhome if the tow bar becomes detached. Tow bar wiring syncs your vehicle's signal lights with your motorhome's tail lights, as required by law in most states. Finally, the flat tow braking system - also required in most states - activates the brakes in the toad when you hit the brakes in the RV, making for smoother, safer braking, and preventing wear on your motorhome.
Ratings & Reviews
Kate F.
4/23/2026
Thank you for the detailed review and for sticking with the install George. That is a tight space to work in, and we really appreciate you sharing both the challenges and your thought process along the way. You make some very valid points about the alignment sensitivity and adjustability of the switch. I agree, that kind of precision fit without an easy lateral adjustment can make the install more tedious than it should be. It does not make it right, and feedback like this is exactly what helps highlight areas for improvement. It is great to hear that it has been working reliably for you over a few thousand miles so far. Your habit of checking function during hookup is a solid practice and definitely the way to go with setups like this. I will be passing your feedback along to the manufacturer for review, especially your notes on the switch design and mounting adjustability. Also, thank you for including photos even with the tight space. They are very helpful for others tackling the same install.
Victoria H.
1/14/2025
That's quite impressive Fred, nice ride!
Fred
1/8/2026
Everything works just fine! Great product and support! Thanks E-t
Josh B.
1/8/2026
Alan
9/8/2026
Its been a year and to be honest, I never have to think about my tow setup. Its there, it works perfect like the day I got it. I cant recommend this any higher. Smooth towing without worrying about it.
Lazer S.
9/8/2026
Kate F.
12/17/2025
I wish you could mount it there Donald, but those stop-light-switch studs are only designed to hold the switch bracket. Adding the pulley bracket changes the spacing and alignment, which can make the brake lights stay on, not come on, or throw off the Invisibrake’s operation. The studs also aren’t meant to handle the side-load from the cable, so Roadmaster doesn’t recommend using them. For drilling stainless, the trick is a cobalt bit (M35 or M42), slow speed, steady pressure, and cutting oil so the metal doesn’t work-harden. Are you new to flat towing, or just getting a different vehicle set-up?
Michael R.
1/18/2024
Still working great
Mark S.
11/3/2025
Its a good choice because its easy in easy out. I have two jeeps that can flat tow, so i was covered for braking in either one
Do you have a question about this Flat Tow Brake System?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Robert
5/27/2022
This fixed the problem we had with our braking system. Everything is still working well.